Dedalus Bridge Speaker Jumpers

Dedalus Bridge — Remove the Weak Link at the Speaker Terminals

Many bi-wire-capable loudspeakers use simple brass plates to connect their high- and low-frequency binding posts when bi-wiring or bi-amping is not in use. Ricable Dedalus Bridge replaces those stock links with the same high-purity conductor technology used in the Dedalus Speaker MKII cable, preserving signal quality through the final connection to the loudspeaker.

Each set contains four flexible 16 cm spade-to-spade jumpers—two red and two black—hand-assembled in Italy for a secure connection between upper and lower binding posts.

Technical Highlights

• Configuration: Four-piece spade-to-spade jumper set.
• Conductor: 6.4 mm² MARC™ 7N copper, 99.99999% purity.
• Construction: 750-strand twisted conductor with R-TEC™ technopolymer dielectric.
• Resistance: 3.4 Ω/km.
• Capacitance: 50 pF/m.
• Power handling: Up to 650 W RMS.
• Connectors: Pure copper spades, 24K gold plated.
• Termination: Hand-soldered using a Sn/Ag/Cu eutectic alloy.
• Length: 16 cm per jumper.

Designed for a Cleaner Final Connection

Dedalus Bridge is an ideal partner for Ricable Magnus and Dedalus speaker cables, but it can also improve any compatible loudspeaker installation where factory terminal plates would otherwise remain in the signal path. The flexible construction accommodates closely or widely spaced binding posts, while the double-cantilever spades accept terminals up to 8 mm in diameter.

Handcrafted in Italy, Warrantied for Life

Every Dedalus Bridge set is assembled and inspected by hand at Ricable’s Italian facility and is covered by Ricable’s lifetime warranty.

What’s in the Box

• 4 × Ricable Dedalus Bridge spade-to-spade jumpers: two red and two black.

Preserve the signal all the way to the loudspeaker.
Dedalus Bridge replaces the ordinary brass link with purpose-built 7N copper conductors and premium terminations.

Princess Pasta Audio is the exclusive distributor for Ricable in North America.